System Requirements; Setting Up Pc Link - Sharp CE-LK2 Operation Manual

• 100% IBM Compatible PC
®
• Microsoft Windows
• Pentium ® 150MHz or higher for Microsoft
®
Pentium 200MHz or higher for Microsoft
Pentium ® /Celeron
• 30MB Available Hard Disk Space
• 64MB RAM for Microsoft
128MB RAM for Microsoft
• CD-ROM drive
• 1 Available Serial Port
• Mouse or Compatible Pointing Device
• Microsoft Word
Tool for Microsoft Word
1 Installing the PC LINK Software
1. Start Windows.
2. Insert the supplied CD-ROM into your CD-ROM drive.
3. Click the Start button, and then select Run.
4. Enter "Setup" followed by the path name of the location where the setup program
is saved.
For example, type "D:\setup".
5. Click on the OK button.
The Setup screen appears, then follow the screen instructions for setup.
When you do not use the Microsoft Word
At the Select Components stage, deselect the check box for "EL-9900 Screen
Capture Tool". In case the function needs to be installed later, reinstall CE-LK2 at
the time of installation.
After completing the setup, the SHARP PC-LINK for EL-9900 folder is added in the
Program folder of the Start menu.
NOTE: When uninstalling the software, quit Microsoft Word

System Requirements

®
98/98 Second Edition/2000 Professional/Me/XP
® Family 300MHz or higher for Microsoft
® Windows
®
Windows
®
2000/XP on your PC for installing the "EL-9900 Screen Capture
® 2000/XP"

Setting Up PC LINK

® Windows ® 98/98 Second Edition
® ®
Windows 2000 Professional/Me
® 98/98 Second Edition/2000 Professional/Me
®
XP
®
:
®
® Windows ® XP
application beforehand.
5