Part Names Of Main Unit - Sharp AQUOS LC-20S1E Operation Manual

Part Names of Main Unit

Controls
Upper control panel
Speaker
OPC sensor
Remote sensor
ANote:
• TV/VIDEO, CH ( )/(
control. Fundamentally, this operation manual provides a description based on operation using the remote control.
8
Headphone jack
Plug the headphone mini-plug into the Headphone jack located on
the front of the TV set.
OPC sensor indicator (Optical Picture Control)
The Optical Picture Control indicator lights up green when the
Brightness is set to Auto. (See pages 21 and 22.)
POWER/STANDBY/Remote sensor indicator
A green indicator lights when the power is on and a red indicator
lights when in the standby mode (the indicator will not light when the
main power is off). A red indicator blinks when the TV set receives
the remote control signal.
) i (–)/(+) (Volume) and MENU on the main unit have the same functions as the same buttons on the remote
i (–)/(+) (Volume)
CH ( )/( )
MENU
TV/VIDEO
X (MAIN POWER)
The screen can be adjusted
backwards to an angle between
12 degrees and 35 degrees.
The screen cannot be set up
straight. When changing the
angle, make sure to hold the
stand and adjust the screen to
the best viewable angle.
Adjustable range