Installation - Sharp SJ-20U-G2 Operation Manual

12. The refrigeration system behind and in-
side the refrigerator contains refrigerant.
If this system is punctured it could result
in serious damage to your refrigerator,
therefore do not allow any sharp objects
to come into contact with the refrigeration
system.
13. Should the flexible supply cord be dam-
aged, it must be replaced by service agent
approved by SHARP as a special cord is
required.
14. In case of gas leak, ventilate the area by
opening a window, etc. Do not touch the
refrigerator or the power outlet.
15. Do not place heavy or easily broken ob-
jects on top of the refrigerator. Objects
may fall when opening or closing the re-
frigerator, causing injury.
16. Do not place objects containing liquid on
top of the refrigerator. Spillage may cause
electric shock or fire.
17. Do not drop objects inside the refrigera-
tor or strike the inner wall. This may cause
the inner surface to crack.
18. This refrigerator is not intended for use by
young children or infirm persons without
supervision. Young children should be su-
pervised to ensure that they do not play
with the refrigerator.

INSTALLATION

1.To ensure adequate ventilation for your refrig-
erator, it is recommended to provide space of
6cm on both sides and at the back, and space
of 30cm above the refrigerator. Insufficient
spacing will decrease the cooling efficiency,
resulting in unnecessary consumption of elec-
tricity.
6cm
2.Using the front Adjustable foot, ensure that the
refrigerator is positioned firmly and level on the
floor.
3.In order to prevent possible
electric shock, install the
grounding wire connecting
screw at the rear of the re-
frigerator. (2 pin plug region)
NOTE
• Keep your refrigerator out of direct sunlight.
• Do not place next to heat generating appliance.
• Do not place directly on the ground. Provide
suitable stand.
30cm
6cm
6cm
90 cm
Adjustable foot
Screw
3