Sharp LC-12A2U Operation Manual page 30

Adjusting the V-CHIP Settings (Continued)
I SETTING V-CHIP
Notes:
I If you set "G" to BLOCK, all RATING are automatically blocked.
I If you set "X" to BLOCK, "G", "PG", "PG-13", "R" and "NC-17" are not blocked.
LC-12A2U-GBpp18-40
[1] MPAA RATING
1
Press MENU to display the MENU
screen.
2
Press CH (])/([) to move the
">" mark to "V-CHIP BLOCK"
then press VOL (+).
3
"INPUT SECRET NO." will be
displayed. Enter the 4-digit
secret No. using the channel
select key.
4
Press VOL (+)/(–) to access V-
CHIP select mode, then press VOL
(+)/(–) to select "MPAA RATING".
5
Press CH (])/([) to move the ">"
mark to "PG", then press VOL (+)/
(–) to select BLOCK. If you set
"PG" to BLOCK, "PG-13", "R", "NC-
17" and "X" are automatically
blocked.
6
Repeat pressing MENU to return V-
CHIP select mode to exit.
29
ADJUSTMENT (Continued)
00.11.8, 9:07 AM
29