Using The Printer Mode; Reserving Copy And Scan Jobs - Sharp AJ-6010 Operation Manual

USING THE PRINTER MODE

The unit can be used as a printer after installing the printer driver onto your computer. Refer
to "Print" in the Online Manual for information on using the unit as a printer. Load paper into
the unit for printing in the same way as for copying.

RESERVING COPY AND SCAN JOBS

Reserving a copy job
While the unit is printing, make copy settings, and press the "START" button (
reserve the job. After printing is completed, copying will start. The messages will change as
below.
Printing...
Ready to program
Printing...
Waiting to Copy
Reserving a scan job
While the unit is printing, make the scan setting using the "SCAN" button, and press the
"START" button (
Printing...
Ready to program
Printing...
Waiting to Scan
You cannot send a copy or scan job while printing from the bypass tray.
60
Make the copy settings and press the START button
(
After printing is completed, copying will start.
) to reserve the job, after printing is completed, scanning will start.
Make the scan settings, and press the START button
(
After printing is completed, scanning will start.
) to reserve the job.
) to reserve the job.
) to