Sharp Aquos LC-13S1E Operation Manual page 20

Useful Features (Continued)
T T T
SUBPAGE SUBPAGE
E E
MENU OK
SOUND SOUND MENU MENU
M M
CH CH
TV/VIDEO TV/VIDEO
Adjustment item
Channel
Frequency
Name
Colour system
Sound system
Skip
* This item "Auto" in "Sound system" is only visible when the "Colour system" is set to "Auto".
ANote:
• Depending on the settings in the colour system of the channels, switching between channels may be slow. If you want to speed up channel
switching, switch "Auto" in "Colour system" to the current reception system (PAL or SECAM).
18
LC-13/15S1E(E)-17-22
Programmes (Continued)
[2] Manual adjustment
Individual settings of programmes can be adjusted.
c/d 1
Perform steps 1 and 2 in [1] Automatic
search to display the "Programmes"
screen.
2
Press a/b to select "Manual adjustment",
END
and then press OK to display the "Manual
adjustment" screen.
a/b
3
OK
Press a/b to select the item, and then
press c/d to make the adjustment. (See
the table below for details.)
Channel
• You can also use Channel Select to adjust
Select
the "Frequency" items.
• To adjust "Name", first press OK to active the
text input mode. Press c/d to select the
input position and press a/b to select the
desired character. When you finish inputting,
press OK to set the name.
4
Press END to exit.
Choice/Value range
0–199
044 – 859 (MHz)
A – Z, +, -, ., !, /, 0 – 9
Auto, PAL, SECAM
B/G, I, D/K, L, Auto*
on off
18
Description
The channel changes to the higher or lower channel.
Receivable frequencies depending on TV norm, installation
site, and range.
Programme name (up to five characters).
Colour norm.
TV norm.
Channel numbers with a "(•) (RED)" mark on the left are set to
SKIP.
03.7.17, 0:16 PM