Table of Contents
Advertisement
Loading a PC Card Adapter
Loading a PC Card Adapter
You need to set a memory card in a PC card adapter before
loading it. (See page 25.)
1
Check the Card Eject button is pressed.
2
Insert a PC card adapter into the PC card slot on the
LCD TV set slowly.
3
The Card Lamp turns green.
Changing from Card Mode to the TV mode
Press either Channel Select, TV/VIDEO or CH(
26
Important:
• Do not allow foreign objects to enter the PC card slot. This could lead
* Insert a card straight
into the slot.
)/(
).
NOTE
• If the Card Eject button is not in the depressed position, the card
• When ejecting the PC card adapter, confirm the Card Lamp is
• Never eject the PC card adapter when the Card Lamp is red.
• When there are many files, reading can take about 5 minutes.
Inserting/Removing a PC Card
to defects.
1
Confirm the Card Eject button is in the depressed
position.
The Card Eject button
Press the Card Eject button.
2
Insert the PC card adapter.
PC card adapter
The Card Eject button
The Card Lamp lights up green.
3
Press the Card Eject button, and remove the PC card
adapter.
Confirm the Card Lamp has turned green.
When pressed, the card eject button pops up.
The Card Eject button
The PC card adapter is ejected when the button is
pressed again.
cannot operate. Please use with the Card Eject button in the
depressed position.
green before ejecting the adapter.
Advertisement
Table of Contents
