Driver Installation - Sapphire Audio 7000 DDR User Manual

Driver Installation

You are now ready to proceed with the installation of the VGA Card driver.
Windows® "New Hardware Found"
New hardware will be detected after you restart your computer. To finish setting up your
hardware click Yes when prompted to restart.
To Identify New Hardware in Windows® 98SE, Windows®
Me, Windows® 2000 and Windows® XP
1 Windows® may launch the "Update Device Driver Wizard" to install the Standard VGA
Driver. If it does, follow the step-bystep instructions below to allow Windows® to
correctly identify your new hardware.
If the Wizard does not appear, proceed directly to "Installing the VGA Card Driver
for Windows® 98SE, Windows® Me,Windows® 2000 and Windows® XP".
2 Click Next.
3 Click Finish.
4 Insert your Windows® CD into your CD-ROM drive.
5 Click OK.
6 Type the following:
D:\SETUP
(If D is not your CD-ROM drive, substitute D with the correct drive letter.)
7 Click OK.
8 Click Yes to restart your computer.
You are now ready to install the VGA Card driver. Proceed to "Installing the VGA Card
Driver for Windows® 98SE, Windows® Me,Windows® 2000 and Windows® XP".
and follow the step-by-step instructions to complete the installation.
Installing the VGA Card Driver for Windows® 98SE,
Windows® Me, Windows® 2000 and Windows® XP
1 Insert the VGA CARD INSTALLATION CD into your CD-ROM drive.
If Windows® runs the CD automatically, proceed to step 6.
2 Click Start.
3 Select Run.
4 Type the following:
D:\ATISETUP
(If D is not your CD-ROM drive, substitute D with the correct drive letter.)
5 Click OK.
6 Click on ATI Easy Install to begin the Installation Wizard.
7 Click Next.
8 Click Yes to the license agreement.
9 Follow the Wizard's on-screen instructions to complete the installation.
The Express installation option is recommended. If your VGA Card includes a
multimedia component, the software for that component will automatically be installed,
along with the ATI driver, by selecting this option.
5
Driver Installation