NEC Express5800/120Rj-2 Configuration Manual page 14
Nec servers configuration guide
Hide thumbs
Also See for Express5800/120Rj-2:
- User manual (206 pages) ,
- Datasheet (2 pages) ,
- Getting started manual (2 pages)
Table of Contents
Advertisement
Optional Boards and Adaptable Expansion Slots
Product name
N code
Slot size
(Full-height or Low Profile)
Supported board type
Installable board type
RAID Controller (128MB, RAID 0,1)
-
(PCI EXPRESS (x8))
Disk array controller (SAS, External)
N8103-90
(PCI EXPRESS (x8))
SCSI controller
N8103-95
(64bit/66MHz PCI)
SCSI controller
N8103-75
(64bit/133MHz PCI-X)
SCSI controller
N8103-107
(PCI EXPRESS(x1))
SAS controller
N8103-104
(PCI EXPRESS(x8))
Fibre Channel controller (2Gbps/Optical)
N8190-120
(64bit/133MHz PCI-X)
Fibre Channel controller (4Gbps/Optical)
N8190-127
(PCI EXPRESS(x4))
Fibre Channel controller (4Gbps/Optical)
N8190-131
(PCI EXPRESS(x4))
100BASE-TX adapter
N8104-111
(32bit/33MHz PCI)
1000BASE-T adapter
N8104-119
(64bit/133MHz PCI-X)
1000BASE-T adapter (2ch)
N8104-120
(64bit/133MHz PCI-X)
1000BASE-T adapter
N8104-126
(PCI EXPRESS(x1))
1000BASE-T adapter (2ch)
N8104-121
(PCI EXPRESS(x4))
1000BASE-T adapter (2ch)
N8104-122
(PCI EXPRESS(x4))
1000BASE-SX adapter
N8104-112
(64bit/133MHz PCI-X)
10GBASE-SR adapter
N8104-123A
(PCI EXPRESS(x8))
*1 Maximum board length
Full Height short: up to 173.1mm long: up to 312mm
Low Profile MD1: up to 119.9mm MD2: up to 167.6mm
*2 To install optional Riser Cards [N8116-07/-08/-18], remove the standard riser card. The optional cards are
mutually exclusive.
*3 Up to one each PCI bus. The 120Rj-2 allows up to two N8104-120 adapters. Do not use the N8104-119/-
120 adapters with the N8104-112 adapter in the same system.
*4 The N8104-126 adapter can be teamed to the identical adapter only (not to other adapters).
*5 Cannot be teamed to other adapters for AFT and ALB. The 120Rj-2 supports up to two adapters
([N8104-121] and/or [N8104-122]).
Note:
• You cannot create an AFT or ALB team across the standard LAN interface and optional LAN board.
• PCI boards with different clock speeds operate at the lowest speed when inserted into the same PCI
bus.
• You cannot use two or more PCI boards when installing four or more 8GB Memory Module Set
[N8102-312].
Standard Slots
Bus A
Bus B
Bus C
PCIe
PCIe
PCIe
#1C
#2C
#3C
x8
x4
x4
Low Profile
x8
x4 socket
socket
MD2
*1
-
-
O
-
-
-
-
-
-
O
O
O
-
-
-
O
O
O
O
-
-
-
-
-
-
O
O
-
-
O
O
-
-
O
-
Standard riser
card*2
Bus D
Bus E
PCI-X
PCI-X
PCIe
#1B
#2B
#3B
64bit
x8
100MHz
Full Height
x8
3.3V
socket
Long/Short
-
-
-
Installed in as standard
Max. 2
-
-
-
O
N8103-90 cannot connect to the internal HDDs
-
O
O
-
Max. 3
Max. 3
-
O
O
-
Do not use with N8103-107
-
-
-
O
Do not use with N8103-75
-
-
-
O
Max. 2, not for internal HDD
-
O
O
-
-
-
-
O
-
-
-
O
-
O
O
-
-
O
O
-
*3
-
O
O
-
Max. 2
-
-
-
O
*4
10BASE-T is not supported.
-
-
-
O
*5
Max. 2
-
-
-
-
10BASE-T is not supported
*5
Max. 1 (When configuring AFT teaming, max.2)
-
O
O
-
*3
-
-
-
O
Max. 1
120Rj-2
Remarks
1-5-14
Advertisement
Table of Contents
