NEC Express5800/120Rj-2 Configuration Manual page 12

PCI slot
Full-Height
Riser Card
LAN
-100BASE-TX adapter (PCI) [N8104-111]*
-1000BASE-T adapter (PCI-X) [N8104-119]*
-1000BASE-T adapter (PCI-X) [N8104-120]*
-1000BASE-SX adapter (PCI) [N8104-112]*
-1000BASE-T adapter (PCIe(x1)) [N8104-126]*
-1000BASE-T adapter (PCIe(x4)) [N8104-121]*
-1000BASE-T adapter (PCIe(x4)) [N8104-122]
-10GbE adapter (PCIe(x8)) [N8104-123A]*
* For locally purchased non-NEC LAN adapters,
see the "Information of Local Procurement" in the Chapter 2.
SCSI controller
for Device Expansion Unit
- SCSI controller [N8103-95] <Ultra160 SCSI>
- SCSI controller [N8103-75] <Ultra320 SCSI>*
- SCSI controller [N8103-107] <Ultra320 SCSI>*
*You cannot use N8103-75 and N8103-107 at the same time.
- SCSI cable O
[K410-94(01)]
[K410-94(02)]
See section 1.9 "Device Expansion Unit."
Disk array controller
- [N8103-90]
<SAS, External>
Additional DAC battery
SAS controller
- [N8103-104]
Fibre channel controller
- [N8190-127]
<1ch, 4Gbps, optical>
- [N8190-131]
<2ch, 4Gbps, optical>
Fibre channel controller
- [N8190-120]
<1ch, 2Gbps, optical>
See section 1.8 "Disk Expansion Unit."
Riser Card Variety
- Standard: 64bit/100MHz PCI-X x2 + PCIe (x8) x1
- [N8116-18]: PCIe (x8) x1 + PCIe (x4) x2
- [N8116-07]: 64bit/133MHz(3.3V) PCI-X x1 + 64bit/100MHz(3.3V) PCI-X x2
- [N8116-08]: 64bit/33MHz(5V) PCI x3
2003
EL4
2003 R2
2003
EL4 EL4x64
Device Expansion Unit
2003 R2 R2x64
External I/F
[N8103-94]
SATA/SAS
2003 R2 R2x64
Disk Array Unit
EL4 EL4x64
or
Device Expansion Unit
2003 R2 R2x64
EL4 EL4x64
NEC Storage S Series
Fibre Channel
Disk Array Unit
2003 R2 R2x64
EL4 EL4x64
Fibre Channel
Disk Array Unit
120Rj-2
R2 R2x64
EL4x64
LAN
connection
R2x64
R2 R2x64
Disk Expansion Unit
(SAS)
1-5-12