Bframe No - FujiFilm FinePix S2940 Owner's Manual

1 Note
Pictures taken at continuous shooting modes of I,
O, and L are always displayed after shooting. Pic-
tures taken in other continuous shooting modes are
recorded without being displayed.
Blink Detection (pg. 32)
At settings other than OFF, a warning will be dis-
played if the camera detects subjects who may have
blinked when the picture was taken. If ZOOM (CON-
TINUOUS) is selected, you can view these subjects
using zoom.
100
B FRAME NO. B
FRAME NO.
New pictures are stored in
image fi les named using a
four-digit fi le number as-
signed by adding one to the
last fi le number used. The
fi le number is displayed dur-
ing playback as shown at right. B
controls whether fi le numbering is reset to 0001
when a new memory card is inserted or the cur-
rent memory card is formatted.
• CONTINUOUS: Numbering continues from the last
fi le number used or the fi rst available fi le num-
ber, whichever is higher. Choose this option to
reduce the number of pictures with duplicate
fi le names.
• RENEW: Numbering is reset to 0001 after format-
ting or when a new memory card is inserted.
1 Notes
• If the frame number reaches 999-9999, the shutter
release will be disabled (pg. 114).
• Selecting R RESET (pg. 96) resets B FRAME NO. to
CONTINUOUS but does not reset frame numbering.
• Frame numbers for pictures taken with other cam-
eras may diff er.
The Setup Menu
Frame number Frame number
100-0001 100-0001 100-0001 100-0001
Directory Directory File File
number number number number
B FRAME NO.