Table of Contents
Advertisement
4. Data Selection and Transfer Selection
In the "Transfer" field, select [Display <-- Card], [Display --> Card] or [Display <--> Card]. Press
the desired switch to turn the switch on. Multiple switches can be pressed in the "Data Selection"
field.
Data selection
5. Starting Data Transfer
Press the [Start] switch. Data transfer is started. During data transfer, the [Start] switch changes
into [Busy] and flashes. When data is transferred, the following message is displayed.
Press the [OK] switch.
6. Press the [Return] switch. The "Card Menu" screen is displayed again.
2. Main Menu Screen
Transfer selection
6-17
6
Advertisement
Table of Contents
