Table of Contents
Advertisement
2-18
4. Modular Jack (MJ1/MJ2)
Printer Connection (Serial Printer)
• To connect a printer through serial interface, connect the cable to a modular jack (MJ1/MJ2).
• Refer to the specification sheet of the printer to be used for the connecting cable for serial
interface. For information on MJ1/MJ2 signals, refer to page 2-10.
• To connect to a printer equipped with a parallel interface, use a commercially available
parallel-serial converter.
When the serial connector of the converter is a D-sub 9-pin male connector, use Fuji's UG00C-T
connection cable.
UG230
MJ
Compatible Printer Models
Control code system:
• PR201
• ESC-P
Others
• CBM292/293
• MR400
• EPSON STYLUS PHOTO series
Screen Data Setting
From the [System Setting] menu, select [Printer Setting] and open the [Main] tab window.
• Type: (as desired)
• Port: Serial Port (MJ Port) → Go to the [Serial Port] tab window for communication setting.
[Refer to Modular] button
• Modular Jack 1 (or 2)
Printer (Serial Port)
Set the above options.
D-sub 25-pin ←→ 9-pin converter
UG00C-T
PC-PR201 series compatible with MS-DOS computer
ESC/P24-J84, ESC/P-J84, ESC/P super function compatible
with MS-DOS computer
CBM's line thermal printer
(Screen hard copying is not possible.)
Sato's barcode printer "MR400 series"
(It is not possible to print a screen hard copy, data sheet or
sampling data.)
EPSON color ink jet printer STYLUS PHOTO series
(For printer models, refer to the User's Manual
<Supplementary Manual> (FEH376-1).)
↓
↓
Parallel ←→ serial converter
Printer
Parallel port
Advertisement
Table of Contents
