Cleaning And Maintenance - Dean Portable Filters MF90 Series Installation & Operation Manual

DEAN PORTABLE MICRO-FLO OIL FILTRATION SYSTEMS
CHAPTER 5: CLEANING AND MAINTENANCE
5.1 General
Cleaning operations fall into three general categories:
Wiping unit clean after each filter session;
Cleaning, changing filter paper and preparing the unit for the next day's business.
Weekly cleaning to remove oil deposits and other particles that were previously
missed.
Do not use water jets to clean this equipment.
Never operate the filter unit unless cooking oil is at operating temperature.
5.2 Each Filter Use
Every time your Portable Filter System is used:
Wash down the insides of the filter pan with hot oil.
Change the top filter paper sheet after each filter session or at the end of the day.
Scrape sediment from the top sheet after each frypot is filtered within a filter session.
Wipe up any oil which may have splashed or spilled.
Wipe all exterior surfaces of the filter unit.
Do not run water or boil-out solution through the filtration system. Doing so
will cause irreparable damage to the pump, and the warranty will be voided.
WARNING
CAUTION
CAUTION
5-1