Radio Operations - Power Acoustik PTID-8960 Operating Manual

RADIO OPERATIONS

Touch the icon "RADIO" to enter the 1st operation page of RADIO Mode:
1, BAND
Touch the icon to switch the FM/AM wave band as following:
FM1 - FM2 - FM3 - AM1- AM2 - FM1
To press the [BAND/ENTER] button of panel or remote control performs same operation.
2, AST
Seeking and store the stations
1. Touch the icon to seek stations with the strongest signal from the lowest frequency
point in the entire wave bands. Touch any icon or press any button to stop seeking.
After seeking, the former stored stations will be instead.
2. Store the received effective radio frequency to the six stored channels M1~M6.
3. The unit will play the stations one by one for few seconds; touch any icon or press any
button to stop playing.
4. It is independent for FM & AM frequency. There are 3 wave bands of FM1、 FM2、 FM3
& 2 wave bands of AM1、AM2, each can store 6 radio stations, totally 30 radio
stations.
5. The unit will stop on the beginning frequency if no available station after seeking one
cycle.
To hold on pressing the [PBC/AST] button of remote control performs same operation.
3, DOWN / 4, UP
Touch the icons to adjust the frequency downward / upward by step decreasing /
increasing.
To press the [∨] / [∧] buttons of the remote control performs same operation.
25