Samsung DVD-P480 User Manual page 7

Rear Panel
1. 5.1CH ANALOG AUDIO OUT
JACKS
- Connect to an amplifier with 5.1ch analog input
jacks.
2. DIGITAL AUDIO OUT JACKS
- Use a coaxial digital cable to connect to a
compatible Dolby Digital receiver.
- Use a coaxial digital cable to connect to an A/V
Amplifier that contains a Dolby Digital, MPEG2
or DTS decoder.
VIDEO OUT JACK
3.
- Use a video cable to connect to the Video
input jack on your television.
- The Video Output in Setup Menu must be set
to Component(I-SCAN).
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan
settings in the TV's menu system.
- See pages 27 ~ 29 to get more information on how to use the setup menu.
1
2
3
4. COMPONENT VIDEO OUT
JACKS
- Use these jacks if you have a TV with
- If Component(P-SCAN) Video Output is select-
- If Component(I-SCAN) Video Output is select-
4
Component Video in jacks. These jacks pro-
vide P , P and Y video.
R B
ed in Setup Menu, progressive scan mode will
work.
ed in Setup Menu, interlaced scan mode will
work.
7