Lenovo ThinkServer 1098 User Manual page 75

Table 20. Items under the Security menu (continued)
Item
Require Admin Password when
Flashing
Require POP on Restart
Hard Disk Password
Fingerprint Setup
TCG Feature Setup
System Event Log
Configuration Change Detection
Note: [ ] indicates the default setting.
Table 21. Submenus under the Hard Disk Password menu
Item
SATA Drive 0 Password
SATA Drive 1 Password
Option
Yes / [No]
Yes / [No]
Enabled / [Disabled]
Option
[Disabled] / User / User + Master
[Disabled] / User / User + Master
Description
If No is selected, the Administrator
Password will not be required when
updating the system software.
If No is selected, the Power-On
Password will only be required when
the system is started with a cold boot.
Enter the submenus to view all the
options. See Table 21 "Submenus
under the Hard Disk Password
menu" on page 63.
Enter the submenus to view all the
options. See Table 22 "Submenus
under the Fingerprint Setup menu"
on page 64.
Enter the submenus to view all the
options. See Table 23 "Submenus
under the TCG Feature Setup
submenu" on page 64.
Enter the submenus to view all the
options. See Table 24 "Submenus
under the System Event Log menu"
on page 64.
Enable or disable Configuration
Change Detection.
Description
The Hard Disk Password prevents
unauthorized users from accessing
the data on the hard disk drive. In
addition to the User Password, an
optional Master Password can be
used to recover the hard disk drive if
the User Password is lost.
Note: If multiple hard disk drives are
present, it is recommended to set the
same password for all the hard disk
drives.
The Hard Disk Password prevents
unauthorized users from accessing
the data on the hard disk drive. In
addition to the User Password, an
optional Master Password can be
used to recover the hard disk drive if
the User Password is lost.
Note: If multiple hard disk drives are
present, it is recommended to set the
same password for all the hard disk
drives.
.
Chapter 6 Configuring the server
63