Table of Contents
Advertisement
4. Locate the memory slots on the system board. See "Locating parts on the system board" on page 8.
5. Remove any parts and disconnect any cables that might prevent your access to the memory slots.
6. Do one of the following:
• If you are replacing a memory module, open the retaining clips and remove the old memory module
that is currently installed.
Figure 13. Removing the memory module
• If you are installing a memory module, open the retaining clips of the memory slot into which you
want to install the memory module.
Figure 14. Opening the retaining clips of the memory slot
.
Chapter 2
Installing or replacing hardware
19
Advertisement
Table of Contents
