Table of Contents
Advertisement
22
CUSTOMIZING SETTINGS
OPTION settings
1
Press
MENU
to access the main menus.
2
Press the Navigation buttons to scroll to
OK.
3
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
- To return to the previous level, press BACK.
4
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Language
To choose the language in which the control names are displayed.
Input Label
Selects a label for an input source to identify a device connected to each input source.
If you want to use HDMI-PC mode, you must set the input label to PC mode.
y
Key Lock
Use the buttons to select On or Off. The monitor can be set up so that it can only be used with the
remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Key Lock tab to the 'On' position.
In order to unlock it, do the following :
Push the MENU button on the remote control and set Key Lock to the 'Off' position.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 99) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Orbiter
Inversion
White wash
DPM Select
A user can choose to turn the power saving mode on / off.
Power Indicator
Use this function to set the power indicator on the front side of the product to On or Off.
OPTION
NOTE
Leave on normal if you don't foresee image burn in being a problem.
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
OPTION
Language
Language
Input Label
Key Lock
and press
Set ID
ISM Method
DPM Select
Power Indicator
Interface Select
Network Setup
Information
Factory Reset
Description
Move
OK
: English
: English
: Off
: Off
: Normal
: On
: ON
: RS232C
Advertisement
Table of Contents
