Understanding The Control Panel; Leds; Stop Button - Samsung CPL-310N User Manual

UNDERSTANDING THE CONTROL PANEL

The color of the status and toner colors LED indicates the machine's current
status.

LEDs

STATUS LED TONER COLORS LED
lights green all LEDs off
slowly blinks all LEDs off
green
fast blinks green all LEDs off
lights red all LEDs off
lights green each LED blinks red
blinks red each LED lights red
lights red each LED lights red
lights green each LED blinks red in a
repeated order
]
All printing errors will be appear in the Smart Panel program window.

Stop button

STATUS LED
Printing demo page
Printing configuration sheets
Canceling print job
The machine is ready to print.
The machine is receiving data from the computer.
The machine is printing data.
• The machine is experiencing an error, such as jammed paper, open cover, empty paper, not
installed waste toner container, or full waste toner container.
• The machine is experiencing a service required error, such as LSU error, fuser error, or ITB error,
Contact your sales or service representative.
Each toner cartridge is near the end of its life.
Each toner cartridge is almost empty. You can print, but the quality is not reliable.
• Each toner cartridge is totally exhausted. You can not print.
• Each toner cartridge is wrong.
The machine is warming up.
In Ready mode, press and hold this button for about 2 seconds until the status LED blinks slowly, and release.
In Ready mode, press and hold this button for about 5 seconds until the status LED blinks fast, and release.
Press this button during printing. The red LED blinks while the print job is cleared from both the machine and the
computer, and then the machine returns to ready mode. This may take some time depending on the size of the print job.
DESCRIPTION
DESCRIPTION
Introduction_ 19