Picture Control; Using Automatic Picture Settings - Samsung LN40F81BD Owner's Instructions Manual

Picture Control

using automatic Picture Settings

Your TV has Three automatic picture settings ("Dynamic", "Standard" and "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, Movie by making a selection from the menu.
1. Press the mEnu button to display the menu.
Press the EntEr button, to select "Picture".
2. Press the EntEr button to select "Mode".
Press the ▲ or ▼ button to select the "Dynamic", "Standard", "Movie" picture
setting. Press the EntEr button.
 Choose Dynamic to increase the clarity and sharpness of the picture.
 Choose Standard for the standard factory settings.
 Choose movie for a natural Image without picture enhancements.
3. Press the ▲ or ▼ button to select "Contrast", "Brightness", "Sharpness",
"Color" or "Tint(G/R)", then press the EntEr button.
4. Press the ◄ or ► button to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the ► button increases it.
Press the EntEr button.
Press the EXIt button to exit.
When you make changes to "Contrast", "Brightness", "Sharpness",
"Color" or "Tint(G/R)", the OSD will be adjusted accordingly.
"Tint" is not activated in PAL-M Signal and PC modes.
Each adjusted setting will be stored separately according to its input mode.
Press the P.moDE button on the remote control repeatedly to select the desired
picture mode.
English - 
mode : Dynamic
Contrast : 100
Brightness : 45
Sharpness : 75
Color : 55
Tint (G/R) : G50/R50
Color Tone : Cool1
Backlight : 10
mode : Dynamic
Dynamic
Standard
Contrast : 100
Movie
Brightness : 45
Sharpness : 75
Color : 55
Tint (G/R) : G50/R50
Color Tone : Cool1
Backlight : 10
Mode : Dynamic
Contrast : 00
Brightness : 45
Sharpness : 75
Color : 55
Tint (G/R) : G50/R50
Color Tone : Cool1
Backlight : 10
Detailed Settings
Contrast
Move Adjust Enter
►
►
►
100
Return