Samsung LN46N71B Owner's Instructions Manual page 44

Installing the Wall Mount Kit
2.
2.
Securely fix the set to the wall. Pull the bracket forward and unfold it. Insert the bracket to the assigned area of the angle
adjustment bracket and tighten the supplied 8 screws(b). (Same for both left and right side)
3.
3.
Remove the screws on the LCD set. Put the plastic hanger and 4 screws(c) together and firmly tighten on the back panel.
W arning
W arning
1. Mount the product on the wall bracket. Be sure to check on the left and right side to see if it is properly fixed.
2. Be careful when installing the product or adjusting the angle as fingers can be caught in the holes.
3. Be sure the wall bracket is securely fixed to the wall. Falling down the product may cause physical damage.
4.
4.
Pull the wall bracket fixing part forward. Two people are required to install the product on the assigned area of the wall bracket.
W W arning arning
Install the LCD set to the wall bracket
and rotate the 2 safety pins on the upper
part to fix.
English-42