Picture Control; Using Automatic Picture Settings - Samsung LN46N71B Owner's Instructions Manual

Picture Control

Using Automatic Picture Settings

Your TV has four automatic picture settings ("Dynamic", "Standard", "Movie", and "Custom") that are preset at the factory.
You can activate either Dynamic, Standard, Movie, or Custom by making a selection from the menu.
Or, you can select "Custom" which automatically recalls your personalized picture settings.
1. Press the MENU button to display the menu.
Press the or buttons to select "Picture", then press the ENTER button.
2. Press the ENTER button to select "Mode".
Press the ENTER button again.
Press the or buttons to select the "Dynamic", "Standard", "Movie",
or "Custom" picture setting. Press the ENTER button.
Choose Dynamic to increase the clarity and sharpness of the picture.
Choose Standard for the standard factory settings.
Choose Movie when watching movies.
Choose Custom if you want to adjust the settings according to personal preference.
When in PC mode, Tint, Sharpness are not available.
3. Press the
or buttons to select "Contrast", "Brightness", "Sharpness",
"Color", or "Tint", then press the ENTER button.
4. Press the
or buttons to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the
Press the ENTER button.
Press the EXIT button to exit.
• "Tint" doesn't operate in HDMI, PC or any Component mode.
• Each adjusted setting will be stored separately according to its input mode.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint , OSD will be
also adjusted accordingly.
English-18
button increases it.