Installing The Wall Mount Kit - Samsung LN46N71B Owner's Instructions Manual

Installing the Wall Mount Kit

Refer to the correct installation guide according to your wall bracket.
This LCD TV accepts a 600 mm x 400 mm VESA-compliant mounting interface pad.
Product Image
Components
Only use the supplied components for the bracket installation.
Angle Adjustment Bracket
Wall Bracket Assembly
1.
1.
Install the angle adjustment bracket on the wall as shown in the figure.
Tighten the angle adjustment bracket by using anchors and screws(a)
orderly from to . If it cannot be installed on the assigned area,
install at the nearest place.
W arning
W arning
1. Check the solidity of the wall before the installation. Strengthen the wall and install the bracket if the wall is not firm enough.
2. The supplied screws and anchors are for installing on concrete walls.
3. For the wall of plaster, marble, or steel, use the appropriate screws.
Bracket
Screw(a) :12
plastic hanger :4
Left :1 Right :1
Use the drill with the required size when making a hole
in the wall. Be sure to follow the directions for the
installation to avoid safety problems.
English-41
Accessories
Anchor :12
Screw(c) :4
How to Tighten Anchors or Screws(a)
Make a hole in the wall with the drill of
6x30.
Clean up the hole.
Insert the supplied anchor to the hole.
Match the angle adjustment bracket to
the holes on the wall and tighten the
screws(a).
Screw(b) :8
Wire Fixing Tool :1