Airing Your Room - Samsung AW Series Owner's Instructions Manual

Airing Your Room

If the atmosphere in your room is stale, you can air it using the Fan
feature. When you operate the air conditioner, air flow blades are open and
half closed automatically to give the proper air flow.
1
If necessary, press the
◆ The air conditioner starts up in the mode selected
Result:
when the unit was last used.
◆ The unit beeps twice.
2 If the Fan speed (F1,F2,F3) is not displayed on the unit:
◆
Press the button on the remote control
or
◆
Press the
Until the fan speed (F1,F2,F3) is displayed.
◆ The unit beeps each time you press the
Result:
◆ The air conditioner starts up in the Fan mode.
➢
◆
You can change modes at any time.
◆
When the air conditioner is in the Fan mode, the
temperature is not displayed; in this case, you do not
need to set the temperature.
3 To set the fan speed to...
High
Med
Low
Result: Each time you press a button, the unit beeps.
4
To control the direction of the air flow, refer to page 10~11.
(On/Off) button.
button on the unit one or more times
Then...
◆ Press the
button on the remote control.
or
◆ Press the
button on the unit until F3
lights up
◆ Press the
button on the remote control.
or
◆ Press the
button on the unit until F2
lights up
◆ Press the
button on the remote control.
or
◆ Press the
button on the unit until F1
lights up
Remote Control
button.
Control Panel
9
E-