Flow Chart of Troubleshooting
10-1-8. LCD Display
LCD does not display
First, Check the connection of FPCB and LCD
Have a some problem of
Display a image (MMI)
Backlight does not work
Backlight's brightness is
This Document can not be used without Samsung's authorization
FPCB
NO
clearly
YES
YES
uniform
YES
END
SAMSUNG Proprietary-Contents may change without notice
YES
Check the connection of LCD and
NO
the solder-status of CN3, SLC300.
Check the voltage. (If had no
NO
problem, Check the
signal)(U301)
Change to new component(U301).
NO
If not effect, change to new LCD.
10-24
Replace a FPCB
BL_CONT