Flow Chart of Troubleshooting
3-1-8. LCD Display
LCD does not display
First, Check the connection of FPCB and LCD
YES
Have a some problem of
Replace the FPCB
FPCB
NO
NO
Display a image (MMI)
Check the connection of LCD and the
clearly
solder-status of SLC1, HDC501.
YES
Check the voltage. (If had no problem,
NO
Backlight does not work
Check the
BL_EN
signal)(PAM3)
YES
NO
Change to new component(PAM3).
Backlight's brightness is
If not effect, change to new LCD.
uniform
YES
END
2-26
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization