Network Connection and setup
¦
You can set up the Internet Protocol so that you can communicate with various connected networks.
Network Connection - Cable
LAN Connection for a DHCP Environment
The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP
address, subnet mask, gateway, and DNS Server are automatically allocated when DHCP is selected, you do not have to enter
them manually.
. Connect the LAN port on the rear panel of the TV and the external modem with a LAN Cable.
. Connect the Modem port on the wall and the external modem with a Modem Cable.
The Modem Port
You can connect the LAN via a Sharer (Router).
The Modem Port
on the Wall
on the Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
LAN Cable
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
English -
TV Rear Panel
ANT 1 IN ANT 2 IN
ANT 1 IN ANT 2 IN
(AIR)
(AIR)
(CABLE)
(CABLE)
LAN Cable
IP Sharer
LAN Cable
ANT 1 IN ANT 2 IN
ANT 1 IN ANT 2 IN
(AIR)
(AIR)
(CABLE)
(CABLE)
ANT 1 IN ANT 2 IN
ANT 1 IN ANT 2 IN
(AIR)
(AIR)
(CABLE)
(CABLE)
TV Rear Panel