Sound Control; Configuring The Sound Menu - Samsung 6 series User Manual

SOUND CONTROL

Configuring the Sound Menu
¦
Mode → Standard / Music / Movie / Clear Voice / Custom
❑
You can select a sound mode to suit your personal preferences.
Press the TOOLS button to display the Tools menu. You can also configure the sound
T
mode by selecting Tools → Sound Mode.
Equalizer
❑
The sound settings can be adjusted to suit your personal preferences.
Mode

You can select a sound mode to suit your personal preferences.
Balance

Controls the balance between the right and left speakers.
00Hz / 00Hz / KHz / KHz / 0KHz (Bandwidth Adjustment)

To adjust the level of different bandwidth frequencies
Reset

Resets the equalizer settings to the default values.
SRS TruSurround HD → Off / On
❑
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats.
Press the TOOLS button to display the Tools menu. You can also set the SRS TruSurround HD by selecting Tools → SRS TS
T
HD.
Audio Language (digital channels only)
❑
You can change the default value for audio languages. Displays the language information for the incoming stream.
While viewing a digital channel, this function can be selected.
N
You can only select the language among the actual languages being broadcast.
N
Audio Format → MPEG / Dolby Digital / Advanced (digital channels only)
❑
When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed
difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.
While viewing a digital channel, this function can be selected.
N
The Audio Format appears according to the broadcasting signal.
N
Auto Volume → Off / On
❑
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
English - 
Mode : Custom ►
Equalizer
SRS TruSurround HD : Off
Audio Language : ----
Audio Format : ----
Auto Volume : Off
Speaker Select : TV Speaker
Sound Select Main