Saving The Captured Image To Memory; Retrieving A Saved Image; Removing A Spent Film Pack - Polaroid SPd 360 User Manual

c Check that the printer is in the desired film
mode i.e. colour or black & white film set-
ting, and that the corresponding film is
loaded in the film holder.
d Select a print arrangement using the print
format switch on the camera or printer.
The print format appears in the top right
corner of the camera preview screen for a
few seconds when either of these buttons
are pressed.
e To print, simply press the print button on
either the camera or printer. Printing takes
30-60 seconds during which time the print
indicator on the printer flashes green and a
thumbnail of the printing image is dis-
played in the top right corner of the camera
preview screen.
f When the printing is complete, the printer
beeps and the pull tab indicator flashes
green. Pull the white tab keeping it hori-
zontal to ensure that the film in the film
holder remains aligned (14).
g Pull the tab marked with arrows straight
out in one uninterrupted motion (15). Lay
the film down flat either on the printer or
the surrounding work surface. Don't wave
or touch the developing film or you may
cause the image to develop incorrectly.
h The printer now starts counting the devel-
opment time of the film. As this is the only
picture currently developing, it is film peel
time indicator 1 that shows green for the
duration of the development period.
i When the printer beeps and film peel time
indicator flashes green, peel the back from
the print (16) in one smooth uninterrupted
motion.
Important: The film uses a caustic paste.
Avoid contact with skin, eyes and mouth
and keep away from children and animals.
If you get some paste on your skin, wipe it
off immediately and wash with water to
avoid an alkali burn. If eye or mouth con-
tact occurs, quickly wash the area with
plenty of water and see a doctor. Keep
discarded materials away from children,
animals, clothing and furniture.

Saving the captured image to memory

The system has three image memories
making it possible to save a captured
image and continue to use the system by
changing to another memory for use.
a Enter the main menu by pressing the menu
on/off button. You will see the main menu
(12f) displayed on screen.
b Use the up and down buttons to highlight
an alternative image memory for use.
Ensure the thumbnail of the image you
want to temporarily store is not high-
lighted.
c Press the live/freeze button to select the
chosen image memory and the menu will
close returning you to the full screen
image. The image is now stored on a dif-
ferent image memory and the system is
ready for normal operation once more.
Important: the system does not have the
capability of storing images when power is
switched off. Contact your nearest
Polaroid office for information on p.c. soft-
ware for long term storage of images.

Retrieving a saved image

a Enter the main menu by pressing the menu
on/off button. You will see the main menu
(12f) displayed on screen.
b Use the up and down buttons to highlight
the thumbnail of the image you want to
retrieve.
c Press the live/freeze button to select the
chosen image memory. The menu will
close and you will see the stored image
displayed on screen ready to print.
Note: Remember to change image memory
again if you wish to continue to store this
image. Pressing the live/freeze button at
this stage will mean losing this stored
image.

Removing a spent film pack

a Open the film holder
b Remove the empty film pack by grasping it
at the tab end and lifting it out (17).
English 7