How To Watch A Dvd With Built-In Dvd Player (Avic-900Dvd Only); How To Use The Dvd Remote Control - Pioneer AVIC-800DVD Hardware Manual

CRB1887A_English.book Page 13 Thursday, April 24, 2003 12:29 PM
w Repeat play
You can listen to the music you are currently
playing repeatedly.
e Random play
You can listen to the CD you are currently
playing in a different track order.
r Scan play
You can listen to the first 10 seconds of each
track.
❒
During scan play, if the track you want to
listen to is played, move the Joystick down
to turn it "Off".
❒
On returning to the track where Scan play
started, Scan play is cancelled automati-
cally.
How to Watch a DVD with Built-
in DVD Player (AVIC-900DVD
only)
In case of AVIC-800DVD, you cannot play
DVDs with the Navigation System.
You can fast-forward, fast-rewind, advance one
frame at a time, play in slow motion, or freeze
frame the display. Also, you can check the details
of operation while playing the DVD, using the
DVD information screen. In the DVD information
screen, you can select the chapter, the language,
the subtitles, or the angle.
Before watching DVD
In order to avoid damaging a disc or the main
unit, before inserting a disc, make sure that no
disc is already set in the Disc loading slot.
➲
For information on setting and removing disc
© Page 8
❒
Pressing the VOICE button of the Steering
Remote Control in NAVI SOURCE allows you
to operate the built-in DVD player by voice
command. (This function cannot be used
when this unit is used with AVD-W6210.)
➲
For information on voice operation © Chapter
5 (For touch panel operation types) and Chap-
ter 7 (For remote controlled types) of the Oper-
ation Manual.
How to use the DVD Remote
Control
q
o
i
MENU TOP
!0
AUDIO RTN
!2
S.TITLE DISP
!4
BSSM/
ANGLE
ch call
!6
!5
MENU V.SEL
!7
REAR
OPEN/CLOSE ANGLE ANGLE
1 2 3
u
4 5 6
7 8 9
(1) Transmitter
This transmits the remote contol signals.
(2) POWER button
Not used.
(3) Joystick/OK button
Use this for selecting items on a menu screen or
to confirm a selection.
(4) Operation mode switch
Changes the remote control's mode.
When set to TV, can be used to operate the TV
tuner or display.
➲
For information on the remote control func-
tions when set to TV © Page 25
(5) 7 7 7 7 button
This is used to stop playing.
(6) CLEAR button
This is used when canceling numbers entered
such as chapter numbers.
(7) Numeric keypad
Use this keypad for entering numbers such as
chapter numbers.
!1
POWER
w
!3
e
r
DVD
BAND
TV
RGB RGB
t
!8
WIDE
C
y
CLEAR
10
0
13