Network Menu; Storing The Adjustment Data In Memory - Pioneer DEQ-P90 Owner's Manual

Storing the Adjustment Data in Memory

1. Adjust each Audio Menu.
Equalizer Menu (page 18)
Network Menu (page 23)
2. Switch to the memory mode of
each menu (refer to page 34).
The display switches to Memory
Operation Screen of each menu.
3. To store in memory, press the FUNCTION button corresponding to the
desired memory number for two seconds.
Note:
• When the adjustment data have been stored, the previous data are eliminated and replaced by the
new.
4. Press the SHIFT button to cancel memory mode.
The display returns to the previous screen.
To avoid accidentally erasing stored data
• In order to avoid erasing stored data with new data, it is possible to set up a Protect function
(refer to page 39).
• Protect function is simultaneously turned on for M1, M2, M3 and M4 and it is not possible to store
new data in these memories. In this case, to store the new data, select M5 or cancel the protect func-
tion.
To cancel the protect function, the memory to be canceled must be recalled. Therefore, the current
adjustment data is cleared. When the Protect function has been canceled, make the adjustment
again.
36