Assembly - Samsung SGH-C250 Service Manual

Exploded View and Parts List

2-4. Assembly

1
1) Attach the fixing tape of LCD FPCB
2) Solder the LCD FPCB
3) Attach the insulation tape
4) Detach the cover of adhesive tape
5) Attach the LCD PANNEL to pba
※ caution
1) Arrange the lcd fpcb exactly
1) Be careful not to make scratch and molding
damage!
2) Be careful when soldering the FPCB
3) DO not overheat the FPCB
3
Arrange Wires clearly on
SPEAKER and MOTOR !
1)Insert lcd into FOLDER LOWER.
※ caution
1) When inserted FPCB, Arrange Wires clearly as
above picture is shown.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Soldering the motor and speaker
2) Assemble the LCD connector
※ caution
1) Be careful not to make scratch and molding
damage!
2) Be careful not to damage LCD FPCB!
4
4
3
2
1
1) Assemble FOLDER UPPER with FOLDER
LOWER following the orders as below picture is
shown.
※ caution
1) Be careful not to make scratch and molding
damage!
2-6