Samsung SGH-C250 Service Manual page 10

5
SCREW CAP POINTS
1) Remove screw caps.
2) Unscrew the FOLDER Upper.
※ caution
1) Be careful not to make scratch and molding damage!
2) Be careful not to damage LCD FPCB!
7
1) Disassemble the MOTOR and the SPEAKER
from FOLDER LOWER by using a pincette.
2) Melt the lead of motor and speaker's joint
※ caution
1) Be careful not to make scratch and molding damage!
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) By using an assembly stick, Disassemble
Folder Upper from Folder lower
(Right and Left are the same process)
※ caution
1) Be careful not to make scratch and molding damage!
8
1) Detach the insulation tape
2) Disassemble the LCD FPCB connector
3) Disassemble the LCD PANNEL from PBA
4) Melt the lead of LCD FPCB and detach the LCD
FPCB
※ caution
1) Be careful not to damage the LCD FPCB and LCD
PANNEL
2-5
Exploded View and Parts List