Remote Control; Installing Batteries In The Remote Control - Samsung 5 series User Manual

Remote Control

¦
You can use the remote control up to a distance of about 23 feet from the TV.
N
The performance of the remote control may be affected by bright light.
N
The product color and shape may vary depending on the model.
N
1 POWER: Turns the TV on and
off.
2 NUMERIC BUTTONS: Press to
change the channel.
3 _: Use to select a channel over
100. For example, for channel
122, press _, then "2", then "2".
4 MUTE M: Press to temporarily
cut off the sound.
5 y: Press to increase or
decrease the volume.
6 CH LIST: Used to display
Channel Lists on the screen.
7 TOOLS: Use to quickly select
frequently used functions.
8 INfO: Press to display
information on the TV screen.
0 MEDIA.P: Not available.
! MTS: Press to choose stereo,
mono or Separate Audio
Program (SAP broadcast).
@ Use these buttons in the DMA
and Anynet + modes. (∏: This
remote can be used to control
recording on Samsung recorders
with the Anynet + feature)
# TV: Selects the TV mode directly

Installing Batteries in the Remote Control

¦
. Lift the cover at the back of the remote control upward as shown in the figure.
. Install two AAA size batteries.
Make sure to match the '+' and '–' ends of the batteries with the diagram inside the
N
compartment.
. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won't be using the
N
remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.)
If the remote control doesn't work, check the following:
N
● Is the TV power on?
● Are the plus and minus ends of the batteries reversed?
● Are the batteries drained?
● Is there a power outage or is the power cord unplugged?
● Is there a special fluorescent light or neon sign nearby?
$ PRE-CH: Enables you to return
to the previous channel you were
watching.
% z : Press to change
channels.
^ SOURCE: Press to display
and select the available video
sources.
& fAV.CH: Press to switch to your
favorite channels.
* MENU: Displays the main on-
screen menu.
( RETURN: Returns to the
previous menu.
) UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTERE: Use to
select on-screen menu items and
change menu values.
a EXIT: Press to exit the menu.
b P.SIZE: Picture size selection.
c SRS: Selects SRS TruSurround
HD mode.
d CC: Controls the caption
decoder.
e GUIDE: Electronic Programme
Guide (EPG) display
English -