Table of Contents
Advertisement
Exploded View and Parts List
2-4. Assembly
1
LCD
< Figure 1 >
1) Combine LCD Module.[Figure 1]
2) Insert the Touch Key F-PCB [Figure 2]
※ caution
1) Be careful of the possible damage on FPCB
3
both-sided Tape
< Figure 1 >
1) Fix the MIC in position like the picture.
※ caution
1) Check the damage of F-PCB with an eye.
Touch Key Connector
< Figure 2 >
Green insulated Tape
< Figure 2 >
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
Camera
< Figure 1 >
1) Combine Camera module.[Figure 1]
2) Combine Speaker module.[Figure 2]
4
Screw(1.4*4)
Torque:1.2±0.1Kgf ㆍ Cm
Screw(1.4*1.6)
Torque:1.0±0.1Kgf ㆍ Cm
< Figure 1 >
1) Assemble the mic cover and then screw
2 points.
2) Attach the KEY PAD.
3) Press down the KEY PAD so as not to be
detached it.
※ caution
1) Check the connecting condition of KEY PAD.
2-8
Speaker Module
< Figure 2 >
Screw Cap
< Figure 2 >
Advertisement
Table of Contents
Troubleshooting
