Samsung SCH-211 Service Manual page 16

3-3-5 Cables
1. Connect the cradle and the hands-free box
with the data cable. See the figure 3-4.
2. Connect the antenna cable to the RF jack of
the cradle.
3. Connect the power cable as follows:
Connect the red wire to the battery (+) termi-
nal, black wire to the battery (-) terminal.
Then connect the orange wire to the switched
side of the ignition switch, and then connect
the brown wire to the stereo mute wire from
your vehicle stereo.
4. Connect the other end of the power cable to
the PWR jack of the hands-free box.
Samsung Electronics-Contents may change without notice.
Notes:
¥ It is recommended to connect the power cable
directly to the battery to avoid power noise.
¥ Make sure the connection, in the vehicle,
between the battery (-) terminal and vehicle
chassis is made correctly.
¥ Make sure the fuse having a proper capacity is
used on the power cable.
¥ Make sure the cables do not pass over any sharp
metal edge that may damage it.
Figure 3-4 Cable Connections
PWR
3A FUSE
RED
BLACK
ORANGE
BROWN
Installation
BAT.(+)
BAT.(-)
IGN. Switch
STEREO Mute
3-5