Selecting Cool Mode
14
E-
You can select Cool mode if you want to cool your room.
You can adjust the temperature and the fan speed when cooling.
1
Press the
(On/Off) button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button on the remote control until
Result:
The indoor unit beeps each time you press the
The air conditioner runs in Cool mode.
Note
You can change modes at any time.
3
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result:
Each time you press the
- The temperature adjusts by 1°C
- The indoor unit beeps
If the room temperature is higher than the selected
temperature, the air conditioner starts cooling.
If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan continues to operate.
4
Press the
button to select the fan speed until the required setting is
displayed.
Automatic (rotated :
Low
Medium
High
Maximum
Result:
Each time you press the
5
To control the airflow direction, refer to page 21.
is displayed.
button.
button:
)
button, the indoor unit beeps.