Table of Contents
Advertisement
― Assembly
1
1) The wire of motor and speaker have to maintain the
twisted state.
2) If the wire is dispersed, twist the wires to the
right side. At this time, put the motor wire upside
thespeaker wire.
1) Be careful about the damage of wire
3
1) when assemble PBA, push the hook and four screw boss
holes and recheck PBA assembling with accuracy.
2) Attach the motor, speaker, key connector.
1) The connector with blue wire connect to VIB position.
2) The connector with yellow wire connect to SPK position.
5
1) Adhere the side keys like figure.
1) Then, put the projection of key upside side switch
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View/Disassembly&Assembly Instructions
2
1) Assemble the PBA from right side( arrow mark ) to
the front.
2) Put the Wire like figure.
1) Be careful that the key connector is placed down
the pba.
2) WIRE must be at the fixed location.
4
1) Arrage the WIRE like the figure.
1) Recheck connection part not to get loose.
6
1) Assemble the REAR with the marked hook.
2) Assemble with accuracy, and screw.
5-5
Advertisement
Table of Contents
