Troubleshooting; Check These Points If Your Dishwasher - Samsung DMS400TH User Manual

troubleshooting

ChECk ThEsE PoInTs If your DIshWAshEr...

pROblem
Will not start.
has a bad odor.
has water remaining
after the program has
finished.
has food particles
remaining on dishes.
Does not dry dishes well. There is no rinse aid in the dispenser. Check the dispenser and add rinse
28_ troubleshooting
UserManual-DMS400TH_EN.indd 28
pOSSIble CAUSe
The door is not closed completely.
The start/reset button is not
selected.
No program is selected.
The power cord is not connected.
The water supply does not work.
There is water left over from the last
cycle.
The drain hose is folded or clogged.
An inappropriate program has been
selected.
The filter is contaminated.
No dishwashing detergent is being
used.
The pressure of the supplied water
is low.
One of the nozzles is clogged.
The dishes are improperly loaded.
SOlUTION
Check that the door is latched and
closed completely.
Press the start/reset button before
closing the door.
Select a program.
Connect the power cord.
Check that the water supply valve is
open.
Insert detergent without loading
dishes, and run the Normal cycle to
clean the dishwasher.
Straighten the hose.
Select a program according to the
number and soil level of the dishes,
as directed in this manual.
Clean the filter.
Use a automatic dishwasher
detergent.
The proper pressure of the supplied
water should be 0.05 ~ 0.8 Mpa.
Clean the nozzle.
Rearrange the dishes so they do not
interfere with the spray arm and the
dispenser operation.
aid.
2010-06-01 7:07:24