Table of Contents
Advertisement
Configuring the Network Manager for Modem
Communication
Perform the following steps:
1. Create a Point-to-Point Protocol (PPP) connection with a remote
computer by doing these steps:
•
On the remote computer, create a connection that will accept
incoming connections.
•
Set the incoming connection device to PC Modem.
•
Verify that both, user information and permissions are correct.
•
Ensure that the incoming connection has a properly assigned
IP address.
2. Configure the Palm Tungsten E2 to work with the Modem
Charging Cradle:
•
Open Preferences from the Palm OS Main Menu.
•
Select Communication
•
Create a new connection using these settings:
−
−
−
•
Select OK to save the new connection
•
Open Preferences from the Palm OS Main Menu
•
Select Communication
−
−
−
−
−
User's Guide for Modem Charging Cradle PS6PMCM
Name:
Custom
Connect to:
Modem
Via:
Cradle/Cable
Service:
PSINet
User Name:
<Enter PC User's Name> who's being
connected
Password:
<Enter same PC User's Password>
Connection:
Custom
Phone:
<Enter Phone Number of Remote PC>
Connection.
Network then insert these settings:
7
Advertisement
Table of Contents
