Page 2
Washer This kit is intended level of knowledge Tools needed: Level 9/16" open end wrench Channel-lock adjustable pliers 2# Phillips screwdriver Small flat blade screwdriver Washer Installation 1. Remove the pedestal, installation 2. Carefully lay the washer on it's back. 3.
Page 3
NOTE:" The washer/pedestal assembly nut on each leveling leg up towards the pedestal base and snug with a wrench. Keep the leg extension at a minimum to prevent excessive Dryer Installation 1. Remove the pedestal, installation 2. Carefully lay the dryer on it's back. 3.