Advertisement
Washer
& Dryer Pedestal
Kit
This kit is intended
to be installed
by persons
having
electrical
and mechanical
training
and a
level of knowledge
considered
acceptable
in the appliance
repair
trade.
This kit contains:
Tools needed:
Level
9/16" open end wrench
Channel-lock
adjustable pliers
2# Phillips screwdriver
Small flat blade screwdriver
Washer
Installation
1. Remove the pedestal,
installation
hardware
and instructions
from the shipping carton.
2. Carefully
lay the washer on it's back.
3. Remove the four (4) leveling legs from the washer base and discard.
4. If the washer has rollers, remove the four (4) screws securing the rollers to the base and discard the rollers.
5. Install the four (4) leveling legs (supplied with the kit) fully into the pedestal.
6. Position the pedestal at the bottom of the washer base and align the pedestal mounting
holes with the
threaded
leg holes on the washer.
7. Attach the pedestal to the washer using the four (4) 3/8" X 1" bolts, 3/8" flat washers and 3/8" lock washers.
8. Tighten the bolts with a 9/16" wrench or socket.
9. Carefully raise the washer/pedestal
assembly
to the upright position.
10. Reconnect
the washer to the existing facilities and/or refer to the installation
instructions
that came with the
washer for proper installation.
1341763008/02
Advertisement
