Coordinate - Honda 2013 CR-Z Navigation System Navigation Manual

Coordinate

H DEST button

DEST Menu 2
Specify a location using latitude and longitude map coordinates.

Coordinate
1. Enter the latitude. Select OK.
2. Enter the longitude. Select OK.
3. Scroll the map to position the
cursor over your desired
destination, adjusting the map
scale as necessary. Press the ENTER
button.

If the address is not the desired
location, scroll to another
location and try again.
4. Press the ENTER button again to
display the route calculation menu.
2 Calculating the Route
5. Select Set as Dest.
Entering a DestinationCoordinate
1 Coordinate
Latitude and longitude must be entered up to
the seconds' value.
A yellow box (shown at scales above 1/4 mile)
denotes the area that can be viewed when you
press the ENTER button on the current map.
Information icons are displayed at scales from 1
mile to 1/4 mile. Place/landmark icons are
displayed at 1/8 mile or less. Roads are displayed
at 1/4 mile or less.
If you select multiple icons within the cursor
radius, you are prompted to select one of the
items from a list.
P. 77
73