Using the Control Panel
The Control Panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings*.
[8] [2] [4] [6]
[SET]
*
Items displayed in the control panel depend on the recording mode.
2.
Use [8] and [2] to select the setting you want to change.
Image size/Quality
1
Flash (page 38)
2
Focus (page 40)
3
AF Area (page 43)
4
ISO sensitivity (page 45)
5
* Snapshot image quality cannot be changed using the Control Panel.
3.
Use [4] and [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You also can configure settings other than those listed above (page 71).
• The Control Panel cannot be displayed when certain BEST SHOT scenes are
being used.
Available settings
*
(pages 35, 82)
34
Control Panel
1
2
3
4
5
6
7
8
9
Self-timer (page 46)
6
Face Detection/Make-up/Landscape
7
(pages 47, 83, 84)
EV shift (page 48)
8
Date/Time (page 49)
9
Snapshot Tutorial