Canon EOS 70D Instruction Manual page 108

Easy Connection via WPS (PBC Mode)
108
3
Select a Web service.
Select a Web service to connect to,
then press <0>.
The contents and ordering of the list of items
displayed will vary depending on settings.
The Web service to connect to can be
changed later (p.126).
When the [Send to] screen (p.125) is
displayed, select a destination and go
to step 4.
4 Select [WPS (PBC mode)].
Press the <V> key to select [WPS
(PBC mode)], then press <0>.
Select [OK] and press <0> to go to
the next screen.
5
Connect to the access point.
Press the access point's WPS button.
For details about where the button is
located and how long to press it, refer to
the access point's instruction manual.
Select [OK] and press <0> to
establish a connection with the
access point.
When a connection with the access
point is established, the [IP address
set.] screen is displayed.
6
Set the IP address.
Press the <V> key to select how the
IP address should be set, then press
<0>.