Sending Images To A Web Service - Canon EOS 70D Instruction Manual

The general procedure for sending images to a Web service is as follows.
1
Prepare a computer on which EOS Utility has been
installed.
Use the software CD-ROM provided with the camera to install EOS
Utility.
2
Access Canon Web site from the computer and sign up
as a CANON iMAGE GATEWAY member (free of charge).
If you are already a member, proceed to step 3.
3
Connect the camera and computer with an interface
cable.
Before connection, set [53: Wi-Fi] to [Disable].
4
Start EOS Utility on the computer, log in to CANON
iMAGE GATEWAY, then configure the camera's settings
to enable access to Web services.
For details, refer to the EOS Utility instruction manual (CD-ROM).
5
Connect to the wireless LAN access point from the camera
.
(p.106)
Disconnect the interface cable in advance.
6
Send images to a Web service registered on the camera
.
(p.120)
You can share images with your family and friends by sending
images from the camera to a Web service registered on the camera
or by sending links to the online albums.
Information about countries and areas where CANON iMAGE
GATEWAY service is provided is available at Canon's Web site
(http://canon.com/cig).
When the camera is connected to a computer as described in "Remote
Operation Using EOS Utility" (p.93), settings can be configured without
using any interface cable.
The camera's Wi-Fi functions are compatible with the following Web
services (as of March 2013):
CANON iMAGE GATEWAY, Facebook, Twitter, YouTube, and Email.
Preparation
105