Using The Re-Dial Command; Receiving A Call; Three-Way Calling - Buick 2013 Verano Owner's Manual

7-30 Infotainment System
If an unwanted number is
recognized by the system, say
Clear at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
Verify at any time.
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Digit Dial.
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say Dial.
Once connected, the person called
will be heard through the audio
speakers.

Using the Re-dial Command

1. Press / . The system
responds Ready, followed by
a tone.
2. After the tone, say Re-dial. The
system dials the last number
called from the connected cell
phone.
Once connected, the person called
will be heard through the audio
speakers.

Receiving a Call

When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
Press / to answer the call.
Press / to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
Press / to answer an
incoming call when another call
is active. The original call is
placed on hold.
Press / again to return to
the original call.
To ignore the incoming call, no
action is required.
Press / to disconnect the
current call and switch to the call
on hold.

Three-Way Calling

Three-way calling must be
supported on the cell phone and
enabled by the wireless service
carrier.
1. While on a call, press
2. Say Three-way call.
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press / to link all callers
together.
Ending a Call
Press / to end a call.
/ .