Getting Started; Set-Up - Alcatel One Touch 888A User Manual

Alcatel mobile phone user manual
Table of Contents

Advertisement

1

Getting started

1.1

Set-up

Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off your
cellphone and remove battery before inserting or removing the SIM card.
After removing the back cover, insert your SIM card according to the graphics on
the back of the cellphone. Make sure that it is correctly inserted. To remove the
card, press and slide it out.
Check with your network operator to make sure that your SIM card is 3V or
(1)
1.8V compatible. The old 5 Volt cards can no longer be used. Please contact
your operator.
.....................
(1)
13
Installing or removing the battery
Insert and click the battery into place, then close the cellphone cover.
Unclip the cover, then remove the battery.
Charging the battery
Connect the battery charger to your cellphone and outlet respectively.
Charging may take about 20 minutes to start if the battery is flat.
Be careful not to force the plug into the socket.
Make sure the battery is correctly inserted before connecting the
charger.
The outlet must be near to the cellphone and easily accessible (avoid
electric extension cables).
When using your cellphone for the first time, charge the battery fully
(approximately 3 hours). You are advised to fully charge the battery ( ).
14

Advertisement

Table of Contents
loading

Table of Contents