Edit Waypoint Search Area - Acura 2010 TSX Navigation System Manual

Say or select DONE to return to the
Edit avoid area screen.
If your selected area contains a freeway,
the system will prompt you with a pop-
up box saying "Do you want to avoid
freeways?" Answering "No" allows you
to enter a route through an avoided area
on a freeway and skip the "Avoid area
caution box" (see Pop-Ups and
Disclaimers on page 71).
When you return to the Edit avoid area
screen, the "Vicinity" field is
automatically filled in by the system.
Re-edit the area "Name" if desired.
Select Done on the Edit avoid area
screen to finish editing. Your new
avoided area will now appear on the
"Avoid area" list and be viewable on the
map screen.
NOTE:
• You can select areas to avoid,
however you cannot select roads or
areas that you want the system to use
for routing.
• If you are drawing a box around a
road as an area to avoid, ensure the
following: When you draw the box,
make sure that the road or portion of
a road that you encircled includes an
intersection. For instance, in the
example below, highway 213 will be
avoided, but Van Ness will not be
avoided because it lacks an
intersection in the enclosed box.
2010 TSX
System Setup

Edit Waypoint Search Area

When driving en route to your
destination, you can select a temporary
destination waypoint (marked with a
small flag on the map) along your route
for gas, a restaurant, or other POI. When
you resume your trip from the waypoint,
the system continues the trip to your
original destination. To use this feature,
see Search Waypoint on page 74.
This SETUP item allows you to select
the distance from your highlighted route
line (on either side of your route) that
the system will search for a waypoint.
From the Routing & Guidance screen,
select Edit Waypoint Search Area,
and then choose the desired search
distance for either "On Freeways" or
"On Surface Street."
Navigation System 107